SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
LCD
----End
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
Operation Procedure
5. Press
, select NetEco, and press
6. Set NetEco parameters, and then press
NOTE
In most cases, set Address mode to Comm. Addr..
If the devices connected to the three RS485 ports of
the SmartLogger1000 have duplicate addresses,
you must set Address mode to Logical addr..
.
.
66