Huawei SUN2000L Series User Manual page 27

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
Installation Environment Requirements



Mounting Structure Requirements




Installation Angle Requirements
The SUN2000L can be wall-mounted or pole-mounted. The installation angle requirements
are as follows:


Issue 03 (2018-04-11)
A salt area refers to the region within 500 m from the coast or prone to sea breeze. The regions prone to
sea breeze vary depending on weather conditions (such as typhoons and monsoons) or terrains (such as
dams and hills). An area that is more than 500 m away from the seashore may also be affected by salt.
For example, northern Fukui Prefecture that is within 10 km way from the seashore of the Sea of Japan
and may be affected by sea breeze is considered as a salt area. The whole Okinawa Prefecture and other
areas that may be affected by sea breeze are also regarded as salt areas.
The SUN2000L must be installed in a well-ventilated environment to ensure good heat
dissipation.
When the SUN2000L is installed under direct sunlight, performance derating may be
initiated due to additional temperature rise.
To extend the service life of the SUN2000L, install the SUN2000L in a sheltered place or
install an awning over the SUN2000L.
The mounting structure where the SUN2000L is installed must be fire-resistant.
Do not install the SUN2000L on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight load.
In residential areas, do not install the SUN2000L on drywalls or walls made of similar
materials which have a weak sound insulation performance because the noise generated
by the SUN2000L is noticeable.
Install the SUN2000L vertically or at a maximum back tilted angle of 15 degrees to
facilitate heat dissipation.
Do not install the SUN2000L at forward tilted, excessive back tilted, side tilted,
horizontal, or upside down positions.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
20