Embedded Webui - Huawei SUN2000L Series User Manual

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual

6.4.1 Embedded WebUI

Prerequisites
The SmartLogger1000 has connected to the PC.
Procedure
Step 1 Enter https://XX.XX.XX.XX in the address box of the browser, and press Enter. The login
page is displayed, as shown in
Figure 6-1 WebUI login page
Step 2 Specify Language, User Name, and Password, and then click Log In.
Issue 03 (2018-04-11)
This section uses the WebUIs for SmartLogger V100R001C00SPC111 as an example. The data on the
WebUI snapshots is for reference only.
XX.XX.XX.XX is the IP address for the SmartLogger1000. The default IP address is 192.168.0.10.
 Because of the permission restriction, log in as Advanced User or Special User.
 For the SmartLogger software versions that are SmartLogger V100R001C00SPC111 and later, the
initial password is Changeme.

Use the initial password upon first power-on and change it immediately after login. To ensure
account security, change the password periodically and keep the new password in mind. Not
changing the initial password may cause password disclosure. A password left unchanged for a long
period of time may be stolen or cracked. If a password is lost, devices cannot be accessed. In these
cases, the user is liable for any loss caused to the PV plant.
 If you enter wrong passwords for six consecutive times in 5 minutes, your account will be locked out.
You have to try again with the account 10 minutes later.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 6-1.
6 System Commissioning
54