Huawei SUN2000L Series User Manual page 64

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
Step 6 Set NetEco parameters to ensure that a connection is set up between the SmartLogger1000
and the NetEco 1000S.
1.



Issue 03 (2018-04-11)
Figure 6-5 Adding devices
b. Click Add Devices.
Log in as Advanced User. On the Settings tab page, choose Comm. Param. > NetEco
to set NetEco parameters and upload the security certificate.
Figure 6-6 Setting NetEco 1000S parameters
NetEco server: IP address for the NetEco 1000S server
Port number: If Huawei NetEco 1000S is connected, set this parameter to 16100 by default. If a
third-party NMS is connected, set this parameter to the number of the service port opened by the
system.
Address mode: usually Comm. Address or Logical Address If the devices connected to the three
RS485 ports on the SmartLogger have duplicate addresses, Logical address must be selected.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 System Commissioning
57