Cleaning - Prince Castle Universal JIB Series Operation Manual

Product Holding Bin
Universal JIB Series
When any of the timer LEDs flash, cook more product or remove
5
and discard product as indicated.
GREEN Flashing = Cook more
product
YELLOW Flashing = Cook
more product
RED Flashing = Discard
product
WARNING
Hot surfaces.
To shut down the unit, turn the power On/Off switch to OFF.
7
NOTE: To load preset times/menus:
A. Turn power switch to OFF.
B. Press and hold both the UP and DOWN Arrow buttons.
C. Turn power switch ON.
D. When the four right-most displays show PRESET LOADED, release the buttons.
Before performing any maintenance, turn the power switch to the
OFF position and unplug the power cord from the electrical
receptacle.
Printed in USA 07/13 © 2013
Operation (continued)
A
B
C
D

Cleaning

WARNING
Product, along with any remaining time, can be transferred
6
from one cavity to another as follows:
A. Press and release the
TRANSFER button on the
timer bar of the product to be
moved. Displays for all pans
available for transfer will be
brightly lit. All others will be
dimly lit.
B. Press and release the D. Press and release the PAN button for the
PAN button of the new location. The new location will finish
product to be moved. timing the product. When the transferred
pan time expires, the location will revert
back to the original menu settings.
NOTE: If product transfer is not completed within a pre-programmed
transfer time, the transfer will be cancelled. See your Manager.
CAUTION
This unit is not watertight. Do not clean with a water jet/jet spray. Do not
immerse the unit in water.
1. Turn the unit off and unplug the power cord from the electrical
receptacle.
2. Remove the pan covers and pan racks. Wipe all parts and unit with a
damp cloth. DO NOT use a green Scotch Bright pad cleaner, ice or
water.
4
C. Press and release the
TRANSFER button on the bar
where the product will be
moved. All available pan
locations on the bar will be
brightly lit.
542-525