Setting Product Location (Standalone Mode); Cleaning - Prince Castle EHB-CE Series Operation Manual

To change a menu selection for a specific pan cavity, use the following steps:
1
A. Press and hold the PRINCE CASTLE LOGO button for 6 seconds.
All Pan displays will show PROG.
B. Press a Pan Arrow button to change the menu. The LED Timer will
change to YELLOW and the display will change from PROG to the
assigned menu item.
NOTE: Setting a pan to a particular product will automatically change the other pan in that
To shut down the unit,
2
turn the Power On/Off switch (A) to OFF position.
WARNING:
Before performing any maintenance, turn the
power switch to the OFF position and unplug
the power cord from the electrical receptacle.
540-541revJ-EN

Setting Product Location (Standalone Mode)

All LED Timers will be RED.
(A)

Cleaning

CAUTION:
This unit is not watertight. Do not clean with a water jet/jet spray.
Do not immerse the unit in water.
1. Turn the unit off and unplug the power cord from electrical receptacle.
2. Remove the pans and covers. Wipe all parts and unit with a damp cloth.
DO NOT use a green Scotch Bright pad cleaner, ice or water.
C. Press the UP or DOWN Arrow
button to scroll to the desired
menu item.
E. Repeat steps A – D as required for other Pan displays. Press the PRINCE
CASTLE LOGO button to exit the Program Mode.
NOTE:
A pan may be set as "not used" by assigning "- - - -" as its product.
7 Printed in USA 05/19 © 2019
Extended Hold Bin
EHB-CE Series
D. Press the ENTER button
to select the menu item.