Operation - Prince Castle Universal JIB Series Operation Manual

Turn power On/Off switch to ON position.
1
Load pan covers (if used) onto pan racks and
insert racks into the unit.
A
B
C
D
LED Timing Status
3
LED Timers
RED (flashing) = Discard product
GREEN (steady) = Oldest product, use first
GREEN (flashing) = Cook more product
YELLOW (steady) = Newer product, use green first
YELLOW (flashing) = Cook more product
542-525 Rev. F

Operation

Allow 30 minutes for heaters to
reach operating temperature.
The Temperature Display will
show temperature as unit warms
up to the operating temperature.
Power On/Off Switch
Press all PAN buttons (if applicable).
2
The PAN DISPLAYS will show the
assigned product name.
If no product is assigned, the
display will be dim and show "- - - -".
Pressing the PAN button will not
activate the timer if "- - - -" is
displayed. Pressing PAN button
when product name is displayed
will start timing cycle.
To begin timing cycle, load product and press the PAN button.
4
A
B
C
D
If only one pan is active for a
product, the LED will turn
GREEN.
3
Product Holding Bin
Universal JIB Series
BKFT (Breakfast) or REG
(Regular Menu) will be lit
depending on pre-
programmed menu.
If no other pan is active for a
product, the LED for the first
pan loaded will turn GREEN.
The LED for the 2nd pan (3rd
pan, etc.) loaded will turn
YELLOW.
An LED timer can be stopped
(cancelled) at any time by
pressing and releasing the
corresponding PAN button.
Printed in USA 07/13 © 2013