Atmos Multi 24/80+ Manual

Ã
0DQXDO IRU WKH $WPRV 0XOWL %RLOHUV
3URSDQH &RQYHUVLRQ
3RVLWLRQV
A Screws to lock the casing
B Casing Latches
C Gas injector
D Nozzle
E Gas valve
F Adjusting screw
G Measurement gas pressure
Atmos Multi
0RGLILFDWLRQ 5HTXLUHPHQWV
To convert from natural gas to propane, the following
components are required:
• 1 Gas injector of correct size (see WDEOH  )
•
Reference data
•
2 Propane stickers
 2SHQLQJ WKH %RLOHU
1. Switch off the power to the boiler,
2. Remove the two screws in the control panel (A),
3. Unclip the casing latches (B) and remove the
casing from the appliance,
 &RQYHUWLQJ WKH ERLOHU
1. Unscrew the brass nut on the gas valve and
remove the nozzle,
2. Check the marking on the new injector is as the
data on table I below,
3. Fit the new injector (C) in the mixing chamber.
4. Reassemble the gas nozzle (D) to the gas valve,
not forgetting the sealing ring,
5. Adjust the appliance to the correct settings.
Gas injector code
Injector Diameter ∅
(mm)
Nom. Power Low fire
(kW)
CO -Low fire %
2
O - Low fire %
2
Nom. Power High fire
(kW)
CO - High fire %
2
O - High fire %
2
UhiyrÃD)à ÃQ…‚ƒhrÃ7‚vyr…Ã!#ÃÉÃ"!ÃxXÃ
24 P 32 P
4,0 4,4
7,5 10,0
8,3 8,3
6,0 6,0
25 32,7
9,2 9,2
4,5 4,5
07.99.91.711.0