Affixing Barcode Stickers To Slides - 3D Histech Pannoramic MIDI User Manual

Pannoramic MIDI 1.18 User's Guide
The distance between slide edges and the edges of the mounted
coverslip should be 1-2 mm, and they should be parallel with each
other.
FISH fluorescent signals become more easily detectable for the
scanner, therefore resulting in a brighter and better image, by treating
the slide with a formula that prevents rapid photobleaching of
fluorescent reagents (e.g. VECTASHIELD® Fluorescent Mounting
Medium by Vector Laboratories and ProLong® Gold and SlowFade®
Gold antifade reagents by Invitrogen) during the FISH protocol.
For further information, see the homepages of the manufacturers:
http://www.vectorlabs.com/

3.2 Affixing Barcode Stickers to Slides

This section describes how to affix barcode stickers to slides. Barcodes enable virtual slide
identification.
The label area is recorded by the preview camera, and can be displayed by the control and viewer
software.
April 3, 2014 - Rev 1
Note:
Note:
and http://www.invitrogen.com.
Figure 6 – Slide with a barcode sticker
3DHISTECH Ltd.
3 Operating Slides and Trays
26(127)