Installing And Removing The Filter Module (Fluorescent Option) - 3D Histech Pannoramic MIDI User Manual

Pannoramic MIDI 1.17 User's Guide

5.3.5 Installing and Removing the Filter Module (Fluorescent Option)

1. If using an HXP 120 illumination unit, turn it off.
Crush hazard! Stop the running digitization process before you proceed
with filter module installation or removal.
2. Pull the pair of the protective cover halves apart or remove the right part completely (see
section
3. Select the desired filter in the corresponding software window (see section
Microscope Settings / Filter
user can access it without having to turn the filter wheel manually.
April 3, 2014 - Rev. 1
Figure 82 – Installing and removing the filter module
Warning!
5.3.1 Opening the protective
Settings). The filter will be positioned in such a way that the
covers), but do not switch the main unit off.
3DHISTECH Ltd.
5 Troubleshooting and Maintenance
4.2.3
119(127)