Pannoramic MIDI 1.18 User's Guide
If Lumencor is configured as illumination unit, the corresponding
Enable Lumencor hardware trigger option is displayed on the form.
The function Enable HXP 120 fluorescent light source shutter is
available only for AxioCam MRm Rev 3. The AxioCam and the HXP 120
must be connected by a trigger cable to enable this function.
Filter Settings
On this panel you can define which filters occupy which turret positions.
April 3, 2014 - Rev 1
Note:
Figure 15 – Filter Settings panel
3DHISTECH Ltd.
4 Software Description
37(127)