3D Histech Pannoramic MIDI User Manual page 74

Pannoramic MIDI 1.18 User's Guide
To insert and remove slides
To move a slide to the loading position, click the number of the slide that you want to load
•
To load a slide from the tray to the specimen holder, click
•
automatically generated.
To unload the slide, click
•
To remove the tray, click
•
remove it manually.
To access the Scan Options window, click
•
These settings are only applicable if you do not use profiles. If you use
profiles, the profile settings are used.
Scanning Mode
Full automatic: focus and exposure time are automatically determined by the software
•
User controlled: you can define focus and exposure time manually.
•
The selection of scanning mode influences the number of options on the Focus panel.
To administer profiles, use the Scan Profiles field.
The current profile name is displayed at the bottom left corner of the screen.
•
To save the current profile, click Save.
•
To select an existing profile from the selection menu, click Load.
•
You can delete the current profile by clicking Delete.
•
April 3, 2014 - Rev 1
.
.
Note:
3DHISTECH Ltd.
. It will then be moved to the position where you can
.
4 Software Description
. A preview image is
74(127)