3D Histech Pannoramic MIDI User Manual page 55

Pannoramic MIDI 1.18 User's Guide
TMA tool
TMA tool is used for selecting TMA spots on TMA slides. You can set the selection settings
on the following four tabs:
Select panel
•
•
•
Block panel
April 3, 2014 - Rev 1
Figure 33 – TMA tool: Select
To create a new TMA object, click New.
To select an existing TMA object, click on the object name. The selected object
name will highlight.
To delete an existing TMA object, click Delete.
Figure 34 – TMA tool: Block
3DHISTECH Ltd.
4 Software Description
55(127)