3D Histech Pannoramic MIDI User Manual page 68

Pannoramic MIDI 1.18 User's Guide
1M does not change, the number after 1M represents the slide position. In this example,
the name indicates a slide in position 10.
You can also define names for the slides in the table below, by entering names into the
column Names / Barcodes. You can also define profiles in the selection boxes in column
Profiles if you intend to use different profiles for slides.
•
•
You can save the entered names and assigned profiles by clicking
saved in a CSV format:
You can export this information into Excel where you can change the data and save it again
in CSV format.
You can import previously saved names and assigned profiles by clicking
You can delete all entries from the table by clicking
April 3, 2014 - Rev 1
Only those positions are active that have slides in it.
Current Profile is the profile loaded in Routine Work / Scan Profiles.
1;<slide position>,<slide name>,<profile name>
. You can define a name before saving. The information will be
.
3DHISTECH Ltd.
4 Software Description
.
68(127)