Pannoramic MIDI 1.18 User's Guide
Generate name if no name was defined
•
By choosing this option, a name is generated automatically in the following format if no
name was defined and there is no barcode:
<tray number>M<slide position>
1M does not change, the number after 1M represents the slide position. In this example,
the name indicates a slide in position 10.
You can also define names for the slides in the table, by entering names into the column
Names / Barcodes. You can also define profiles in the selection boxes in column Profiles if
you intend to use different profiles for slides.
•
•
Load Names and Profiles from File
•
You can import previously saved names and assigned profiles by clicking
Save Names and Profiles to File
•
By clicking the
assigned profiles. You can define a name before saving. The information will be saved in a
CSV format:
You can export this information into Excel where you can change the data and save it again
in CSV format.
Delete Names and Profiles
•
You can delete all entries from the table by clicking
April 3, 2014 - Rev 1
Only those positions are active that have slides in it.
Current Profile is the profile loaded in Routine Work / Scan Profiles.
.
1;<slide position>,<slide name>,<profile name>
(for example, 1M10)
button, you can save the entered names and
3DHISTECH Ltd.
4 Software Description
.
97(127)