3D Histech Pannoramic MIDI User Manual page 93

Pannoramic MIDI 1.18 User's Guide
Multilayer Settings
By clicking the
settings are the same as in Brightfield mode, but you can select extended focus or Z-stack
value for the specific channel.
Set the focus level value under the Number of focus levels box, and the Focus step size
(one step = 0.2 μm).
Once you have set the correct values, tick the multilayer checkbox (EF or ZS column) of the
channel for which you want to apply these settings, or activate Enable Multilayer function
in the Filter Properties window.
For more information about Extended Focus, see section
April 3, 2014 - Rev 1
the Multilayer Settings window is displayed. The containing
Figure 60 – Filter properties window
3DHISTECH Ltd.
4 Software Description
4.3.5 Focus panel.
93(127)