Advertisement
Quick Links
APPLICATION
Dodge Ram Quad Cab
Dodge Ram Quad Cab
Dodge Ram Mega Cab
AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST
Invented, engineered and manufactured exclusively by AMP Research in the USA. May be covered by one of the following patents:
6,641,158; 6,830,257; 6,834,875; 6,938,909; 7,055,839; 7,380,807; 7,398,985; 7,584,975 ©2012 AMP Research. All rights reserved.
Printed in USA.
www.amp-research.com
I N S T A L L A T I O N G U I D E
MODEL YR
1500
2002 - 2008
2500/3500
2003 - 2009
2006 - 2009
4
1/12
AMP PART #
75101-01A
75101-01A
75118-01A
INSTALLATION TIME
3-5 Hours
Professional installation recommended
SKILL LEVEL
2
1
4= Experienced
TOOLS REQUIRED
q Safety goggles
q Measuring tape
q Flat blade screwdriver
q Phillips head screwdriver
q Right angle drill
q 1/8" drill bit
q 13 mm socket
q Ratchet wrench and extension
q Soldering iron
q Wire crimpers
q Wire stripper / cutter
q Corrosion inhibiter
q 3/16" hex key wrench (allen wrench )
q 1/8" hex key wrench (allen wrench)
q 4 mm hex key wrench (allen wrench )
q Pop rivet tool
q Electrical tape
WARRANTY
5-Year Limited Warranty
IM75101 rev 01.31.18
4
3
Advertisement
Related Manuals for AMP Research PowerStep 75101-01A
Summary of Contents for AMP Research PowerStep 75101-01A
- Page 1 AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 6:00 AM - 5:00 PM PST Invented, engineered and manufactured exclusively by AMP Research in the USA. May be covered by one of the following patents: 6,641,158; 6,830,257; 6,834,875; 6,938,909; 7,055,839; 7,380,807; 7,398,985; 7,584,975 ©2012 AMP Research. All rights reserved.
-
Page 2: Exploded View
A M P R E S E A R C H P O W E R S T E P – D O D G E R A M INSTALLATION GUIDE Attaching motor to linkage assembly The motors need to be installed before continuing with the rest of the Power Step install. - Page 3 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M (A) End cap left (x1) (B) End cap right (x1) (C) T-nut insert (x2) (D) Socket cap screw (x2) (E) End cap wedge right (x1) (F) End cap wedge left (x1)
- Page 4 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M PARTS LIST AND HARDWARE IDENTIFICATION Hex Bolt Socket Cap Screw Hex Bolt Blind Rivet Mounting Insert Cable tie (7”)
- Page 5 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Prepare brackets for install Note: Steps 1-8 shown on driver side. Repeat these steps on passenger side.
-
Page 6: Driver Side
A M P R E S E A R C H P O W E R S T E P – D O D G E R A M DRIVER SIDE Repeat steps 2 thru 6 for front TORQUE mounting bracket. 16 ft-lbs. - Page 7 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Attach wire harness to the control box. Attach 11” cable ties loosely around Slide controller through cable ties.
- Page 8 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M UNTERMINATED WIRES UNDER SIDE OF VEHICLE www.amp-research.com 8/12 IM75101 rev 01.31.18...
- Page 9 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Remove plastic panel beneath steering column. Remove metal panel revealed by step 21. Model years 2002-2005 will not have this panel to remove.
- Page 10 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Note: You may find two VL/YL wires in Model Years 2004- 2009 Using supplied Posi- bundle.
- Page 11 A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Drill a 9/32” hole through the pinch weld at marked Insert grommet into drilled holes. Insert lamp wires locations.
-
Page 12: Final System Check
A M P R E S E A R C H P O W E R S T E P – D O D G E R A M Check that all doors activate the Power Step and the LED Lights work when doors open and close. - Page 13 5-YEAR LIMITED WARRANTY AMP RESEARCH warrants this product to be free from defects in material and workmanship for FIVE (5) YEARS FROM DATE OF PURCHASE, provided there has been normal use and proper maintenance. This warranty applies to the original purchaser only.