Ec Declaration Of Conformity; Introduction; Features - Racelogic VBOX3i User Manual

VB3i MANUAL

EC declaration of conformity

We declare that this product has been tested to and meet the requirements of:
EC directive 2004/104/EC
"Adapting to technical progress council directive 72/245/EEC relating to the radio interference (electromagnetic
compatibility) of vehicles and amending directive 70/156/EEC on the approximation of the laws of the member states
relating to the type-approval of motor vehicles and their trailers."
And has also been assessed, via technical construction File, by an independent DTI competent body and found to be in
conformance with the essential requirements of:
EC directive 89/336/EEC (and amending directives)
"Council directive of 03 May 1989 on the approximation of the laws of the member states relating to electromagnetic
compatibility."
DTI competent body responsible for issuing certificate of compliance:
3C Test Ltd,
Silverstone Technology Park,
Silverstone,
Northants
NN12 8GX

Introduction

The VBOX3i represents the 3
the VBOX3i can log GPS and other data at 100Hz. The logged data is stored directly onto a compact flash card for easy
transfer to a PC.
The VBOX3i also includes 4 high-resolution analogue input channels to record data from external sensors and 2 CAN
bus interfaces to allow connection of Racelogic input modules while simultaneously transmitting GPS data on the
second bus.
In line with previous VBOX models, the VBOX3i is compatible with all of the existing peripherals including the
multifunction display, ADC03, TC8, FIM03 and YAW rate sensor. To use the IMU integration feature of the VBOX3i an
IMU03 / IMU04 module is required.

Features


IMU integration with GPS data

6.75ms latency

4 x 24bit synchronous differential analogue inputs ±50v

Brake/Event trigger input of 10ns resolution

Voice tagging of data

2 x CAN bus interface

RS-232 serial interface

USB interface

Bluetooth interface
*
RACELOGIC external modules operate from a 12v vehicle supply. Therefore, when using external modules, VBOX supply must not exceed 15vDC
**
2cm 95% CEP positional accuracy, (requiring RTK VBOX upgrade and RTK enabled Basestation)
Page | 5
rd
generation of GPS data logging system from Racelogic. Using a powerful GPS engine,

Compact flash interface

2 x 16bit User configurable analogue outputs

2 x Digital outputs

Brake trigger Input with 100KHz scan rate

Wide 7V to 30V operating range *See Note

Low current consumption

Logging rate selectable from 100, 50, 20, 10, 5 or 1Hz

Can be used with a differential BaseStation for
positional accuracies of up to 2cm**
22 May 2014