Table of Contents
Advertisement
VB3i MANUAL
Mounting the IMU
The IMU should be mounted rigidly to the vehicle mid-way along the wheelbase. Try to position the unit as close as
possible to the centre of the vehicle, making sure it is mounted in the direction of travel - as shown in the image
above. It is also important to mount the sensor so that it is level with the ground.
For best results, mount
antenna as close to each
example: Bolt the IMU to
the GPS antenna on the
If you are using
IMU03, you
the relative
antenna in
IMU to at least
These distances
entered into
via VBOX Tools
using a VBOX
Page | 23
the IMU and GPS
other as possible. For
the seat rails and place
roof directly above.
an IMU04 or
must measure
position of the
relation to the
within +/- 5cm.
must then be
the VBOX either
> VBOX Setup or
Manager.
22 May 2014
Advertisement
Table of Contents
