Checking For Translation Corruption With The Sat; Accessing The System Management Interface (Smi) - Avaya S8 Series Manual

If scheduled maintenance is not in progress, set the Start Time field to a time after the
●
upgrade is completed.
For example, if you start the upgrade at 8:00 p.m. and the upgrade takes 4 hours, set the
Start Time field to 23:59.

Checking for translation corruption with the SAT

To check for translation corruption:
1. Type newterm and press Enter.
2. If you see the following message
Warning: Translation corruption detected
then follow the normal escalation procedure for translation corruption before you continue
the upgrade.

Accessing the System Management Interface (SMI)

To access the server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6 and press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Click yes to suppress alarms
The system displays the Communication Manager System Management Interface
(SMI).
Note:
For Release 5.2 use the System Management Interface (formerly known as
Note:
Maintenance Web Interface).
Note:
If you experience trouble connecting to the Web page, go to
Note:
browser cache on the laptop on page 259.
Preupgrade tasks
Clearing the Web
Issue 1 May 2009 111