Device Settings; Midi Channel - Arturia KEYSTEP PRO User Manual

9.5. Device Settings

The right side of the MIDI Control Center window contains essential parameters that you
can use to optimize the KeyStep Pro for your setup and your working style. You will need to
scroll down to see them all.
Device settings can be saved and recalled. It is a handy feature that enables you to quickly
change the configuration of your KeyStep Pro. Several applications come to mind:
• Redirect the output of each of the Tracks to synths connected to different MIDI
channels
• In a mixed setup, change the CV/Gate setting to switch between Eurorack
standard and the Buchla CV standard.
• Quickly load an alternate set of CC# values for the encoders to enable you
to control a different set of parameters on external synths and set predefined
control ranges
The settings you see here are the same as those in the KeyStep Pro's Utility menu. These
settings are linked to a Project. Each Project can have its own configuration settings.
For an overview of what these settings do, please refer to the

9.5.1. Midi Channel

In this menu, you set the channels on which the four tracks of the KeyStep Pro will send and
receive MIDI signals. The four tracks default to their track number (MIDI channels 1-4); the
Drum channel defaults to MIDI channel 10.
132
Utility Menu section
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration
[p.118].