Table of Contents
Advertisement
If you don't own a MicroFreak you're missing out on something special, but you can learn
from this example anyhow the general workflow is the same for other synths.
We'll select a MicroFreak parameter with a very drastic effect, so it immediately becomes
clear whether the control is working or not. We'll use a CC# to keep changing the Oscillator
Type on the MicroFreak!
By default, the MicroFreak receives on all 16 channels, so we can send CC# messages from
any KeyStep Pro encoder. By default, Control mode transmits on MIDI channel 1.
We will assign CC 9 to Encoder 1 (Pitch). CC 9 changes Oscillator Type on the MicroFreak.
•
Hold down SHIFT and press Project/Utility to open the Utility menu.
•
Scroll down to 'Controller' and press the encoder to select this submenu.
•
Select knob 1 and continue to select CC.
•
Select CC# value 9.
If you now turn the Pitch encoder, the MicroFreak Oscillator Type will change. We can use
the steps in any of the current track's Patterns to control Oscillator Type on the MicroFreak.
Remember how a step takes the current value of an encoder when you activate it? You can
use this to program a series of Oscillator Type changes.
•
Activate Control mode if it is not already active.
•
Select a Pattern on Track 1.
•
Press Step Edit to activate Step Edit mode.
•
Turn the Pitch encoder fully counter-clockwise.
•
Press step buttons 1, 3, 5 and 7 to store '0' values in those steps.
•
Set the Pitch encoder to its mid-position (12 o'clock).
•
Press the step 2 button.
•
Repeat this for steps 4 and 6, remembering to set the encoder in its mid-position.
Play the sequence. You should now hear the MicroFreak alternating between oscillator types.
♪: An option in the MIDI Control Center enables you to set a control range for each of the main
encoders. You could use this feature to limit the range of the Pitch encoder (encoder 1) to 50-100 and
thus only select specific oscillator types. To set this range, click on 'Device Settings' in the MIDI Control
Center and change the min. and max. values listed under Controller> Knob 1.
Arturia - User Manual Keystep Pro - Control Mode
113
Advertisement
Table of Contents
