Table of Contents
Advertisement
•
Disable Pattern Follow mode by holding down SHIFT and pressing Lst Step/
Follow.
•
Press the 32 (page 2) button.
Now the step buttons will only show the status of steps 17-32. If you want, you can play
the Pattern while editing; it will play all 32 steps, but the step buttons will keep showing the
status of steps 17-32.
Simply edit the steps as desired using the step buttons and the main encoders: Gate,
Velocity, TIme Shift and Randomness. When you're finished, if you like, you can re-enter
Pattern Follow mode with SHIFT + Lst Step/Follow.
5.4.3.7. Drum Mode Shift Key Functions
When the Track 1 Drum sequencer is selected, the lowest 24 keys of the keyboard send note
data over MIDI, including gate length and velocity.
The keys also have secondary functions, which are accessed by holding down SHIFT and
pressing one of the keys. These combinations allow you to specify the following Pattern
parameters:
Playback Mode
The lowest three keys are used with the SHIFT button to select the playback mode (that is,
the direction of play).
Here's what each option does:
Forward: plays Pattern beats 1, 2, 3, 4 | 1, 2, 3, 4, etc.
•
Random: plays random beats from the Pattern.
•
Walk: plays the steps using the the Drunkard's Walk Algorithm: when the
•
sequencer is on a given step, there's a 50% chance it will play the next step, a
25% chance it will play the same step again and a 25% chance it will play the
previous step.
The default setting is Forward.
Arturia - User Manual Keystep Pro - Making Tracks
79
Advertisement
Table of Contents
