Table of Contents
Advertisement
9.1.4. Launch Quantize
Launch
Quantize
Project
Scene
Pattern
In this menu, you 'tell' the KeyStep Pro how it should continue to the next Pattern, Chain
or Scene. Should it wait for 1 bar, 2 bars or 4 bar to make the switch? This is useful in live
performance settings where you may not want to interrupt the flow of the music between
Projects.
If Sequencer and Drum Patterns are of unequal length, the KeyStep Pro will wait until the
end of the Drum Pattern before loading the next Project Scene or Pattern.
9.1.5. MIDI Settings
MIDI
settings
Knob
acceleration
Aftertouch
curve
Velocity curve
Transport
send
Transport
receive
Clock send
Clock receive
120
Values
Description
[OFF, 1 bar (d),2
Set the moment the KeyStep Pro switches to another Project
bars, 4 bars]
after you select a new Project
[1 beat, 1 bar (d), 2
Set the moment the KeyStep Pro switches to another Scene
bars, 4 bars]
after you select a new Scene
[OFF, at end (d), 1
Set the moment the KeyStep Pro switches to another Pattern
bar]
after you select a new Pattern
Values
[Slow, Medium, Fast]
[Linear,
Exponential,
Logarithmic]
[Linear,
Exponential,
Logarithmic]
[OFF, MMC, Realtime, Both]
[OFF, MMC, Realtime, Both]
[OFF, ON]
[OFF, ON]
Description
Sets the amount of acceleration applied to the
encoders.
Sets
the
keyboard
response
Aftertouch
Sets the keyboard response curve for Velocity
Set whether the KeyStep Pro sends Transport
signals
Set
whether
the
KeyStep
Transport signals
Enable/Disable clock send
Enable/Disable clock receive
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration
curve
for
Pro
receives
Advertisement
Table of Contents
