Sequencer Sync; Sync/Clock And Reset Outputs; Stop, Start & Continue - Arturia KEYSTEP PRO User Manual

7.2.1. Sequencer Sync

The Sync option is the key to unlocking the creative power of the sequencers. By default,
Sync is ON.
When Sync is active (set to AUTO) the KeyStep Pro's tempo will lock to the nearest multiple
of the tempo of the incoming clock signal.
By default, Sync is active and the Sequencer Rate is set to 1/16.

7.3. Sync/Clock and Reset Outputs

In the Sync menu, you can select whether the clock and/or transport signals will be sent via
each of the following outputs:
• USB
• MIDI Out 1
• MIDI Out 2
• Clock Out
The Reset Output (Reset Out) sends a [4ms 5V high] signal whenever you press STOP or
after a sequence reset with SHIFT + PLAY.
The ON cycle of the Clock output (Clock Out) is +5V, which should be enough to trigger even
the most unresponsive Eurorack modules.
7.3.1. Stop, Start & Continue
Other settings in the Utility menu determine how the Keystep Pro will send and respond to
the Stop, Start & Continue commands it receives. To learn more about this, please refer to
Chapter 9 [p.118].
108 Arturia - User Manual Keystep Pro - Timing