Cv Gate Settings; Controller - Arturia KEYSTEP PRO User Manual

9.5.5.6. Clock Send
Set whether the KeyStep Pro will transmit clock signals to external MIDI devices.
9.5.5.7. Clock Receive
Set whether the KeyStep Pro will receive clock signals from external MIDI devices.

9.5.6. CV Gate Settings

This is where you select the electrical behaviour for each sequencer.

9.5.7. Controller

These parameters enable you to set up the KeyStep Pro as a controller.
'Global MIDI channel' sets the default MIDI channel on which the KeyStep Pro will transmit.
The Knob (encoder) settings define the functions of the five main encoders. Each encoder
can have a different profile. For example, Encoder 1 (Pitch) could transmit CC 9 on MIDI
channel 5 via MIDI Out 2 over the full range of 0-127, while Encoder 2 (Gate) could transmit
CC 19 on MIDI channel 6 via MIDI Out 1 with the range set to a minimum of 50 and a
maximum of 80.
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration 135