Table of Contents
Advertisement
9.1.5.7. Clock Receive
Set whether the KeyStep Pro will receive clock signals from external MIDI devices.
9.1.6. CV Settings
CV
settings
Voice
1.....4
Pitch
Format
Base
Note
Gate
Format
Mod
Type
Mod
Max
Voltage
Pitch
bend
range
This is where you select the electrical behaviour for each sequencer.
Drum
Gates
Gate
format
This is where you set the output voltage level of the Drum Gates. Different brands of synths
and drum synths may require different voltages to trigger them properly.
122
Values
Description
[1V/Oct
(d)
Defines the voltage level the KeyStep Pro will output at the CV Pitch
1.2V/Oct Hz/V]
Out. 1V/Oct (Eurorack and others), Hz/V or 1.2V/Oct (Buchla)
[C-2 (d) to G8]
Sets at which MIDI note the Pitch out outputs 0V
[V Trig 5V (d),
Defines the gate voltage level the KeyStep Pro will output at Gate
V Trig 10V, S-
Out
Trig]
[Velo
(d),
Determines which parameter will be sent to the Velo / Mod outputs
Pressure]
1-10 Volt
Sets a maximum limit to the voltage output of the Mod type
(1-24)
Set a maximum pitch-bend range in semitones. Default = 2
semitones
Values
1...8
[V-Trig 5V (d), V-Trig
12V, S-Trig]
Description
Sets the trigger standard of the Drum Gates, V-Trig 5V
being the default.
Arturia - User Manual Keystep Pro - KeyStep Pro Configuration
Advertisement
Table of Contents
