Advertisement
April 2020
1
Install
1.1
Unpack and inspect
The Rosemount
determination of turbidity in drinking water. The system consists of the
transmitter, sensor(s), cable(s), and flow chamber/debubbler(s). Consult the
table to verify that you have received the parts for the option you ordered.
Table 1-1: Rosemount Clarity II Turbidmeter Parts
Item
Single input turbidity transmitter
Dual input turbidity transmitter
Single input turbidity transmitter with
®
HART
Dual input turbidity transmitter with
HART
Sensor - EPA standards
Sensor - ISO standard
Cable - 3 ft. (0.9 m)
Cable - 20 ft. (6.1 m)
Cable - 50 ft. (15.2 m)
Calibration cup
Molded chamber/debubbler
Note
The transmitter model number is printed on a label attached to the side of
the instrument.
1.2
Install
1.2.1
General installation information
1. Although the transmitter is suitable for outdoor use, do not install it
in direct sunlight or in areas of extreme temperatures.
2. Install the transmitter in an area where vibration and
electromagnetic and radio frequency interference are minimized or
absent.
Quick Start Guide
™
Clarity II Turbidmeter is a complete system for the
Model/part number
1056-03-27-38-AN
1056-03-27-37-AN
1056-03-27-38-HT
1056-03-27-38-HT
8-0108-0002-EPA
8-0108-0003-ISO
2413800
2409700
2409800
2410100
24170-00
Quick Start Guide
5
Advertisement
