Advertisement
Quick Start Guide
Figure 1-4: Debubbler and Flow Chamber
A. Inlet
B. Outlet
C. Sensor port
Procedure
1. Connect the sample line to the inlet fitting.
The fitting accepts ¼-in. OD tubing. See
recommended installation of the sample port.
2. Attach a piece of ⅜-in. ID soft tubing to the drain fitting.
The debubbler must drain to atmosphere.
High pressure and temperature
Before removing the sensor, be absolutely certain that the process
pressure is reduced to 0 psig and the process temperature is lowered
to a safe level!
10
WARNING
Sample point
for
Emerson.com/Rosemount
April 2020
Advertisement
