Using A Lap Former - SunStar SC 7900-Series User Manual

12) USING A LAP FORMER

(1) Left / Right standard position
Make an array of the lap former A point at the center of the 4
sewing needles.
Loosen the clamp screwⓓ and adjust the position of the lap
formerⓐ according to the edge of the overlapping sewing
materials or the feed direction of the fabric.
(2) Front / Rear standard position
Set the lap formerⓐ at the position which the lap former
slide blockⓑ and the needle plateⓒ are attached.
Adjust the lap formerⓐ front and rear depends on the
thickness of the cloth.
30
ⓒ
ⓐ
ⓑ
ⓓ
[ Figure 42 ]
A