Save & Exit Setup - Advantech PCA-6773 Series User Manual

3. You will see "Confirm Password." Type it again, and press
<Enter>.
4. Select Set Password again, and at the "Enter Password" prompt,
don't enter anything; just press <Enter>.
5. At the "Confirm Password" prompt, again don't type in anything;
just press <Enter>.
6. Select Save to CMOS and EXIT, type <Y>, then <Enter>.
6.2.12 Save & Exit Setup
If you select this option and press <Y> then <Enter>, the values entered
in the setup utilities will be recorded in the chipset's CMOS memory. The
microprocessor will check this every time you turn your system on and
use the settings to configure the system. This record is required for the
system to operate.
PCA-6773 User's Manual
Figure 6.12: Save to CMOS and EXIT
84