Usb Connectors (Cn9,Cn25) - Advantech PCA-6773 Series User Manual

2.15.6 Panel type selection (S1)
S1 is an 8 segment DIP switch for DSTN/TFT panel type and resolution
functions.
Table 2.6: S1 Panel Type select
SW SW
1-1 1-2
ON ON
ON ON
ON ON
ON ON
ON OFF ON
ON OFF ON
ON OFF OFF ON
ON OFF OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF ON
OFF OFF OFF OFF
* Default setting
** will support in the future

2.16 USB connectors (CN9,CN25)

The PCA-6773 board provides up to four USB (Universal Serial Bus)
ports. This gives complete Plug and Play, and hot attach/detach for up to
127 external devices. The USB interfaces comply with USB specification
Rev. 1.1, and are fuse protected.
The USB interface is accessed through the 5 x 2-pin flat-cable connector,
CN25 (USB1, 2),CN9(USB3, 4). You will need an adapter cable if you
SW SW
1-3 1-4
ON ON
ON OFF
OFF ON
OFF OFF
ON
OFF
ON ON
ON OFF
OFF ON
OFF OFF
ON
OFF
Panel Type & Resolution
TFT 640x480**
TFT 648x480
TFT 648x480**
TFT 648x480**
DSTN 648x480**
TFT 800x600**
TFT 800x600
TFT 800x600**
TFT 800x600**
DSTN 800x600**
TFT 1024x768** 36bit (H. V. Freq)
TFT 1024x768** 36bit (Synthetic)
TFT 1024x768** LVDS
TFT 1024x768** N/A
DSTN 1024x768** 18bit
DSTN 1024x768** 24bit
19
18bit (H. V. Freq)
18bit (Synthetic)
N/A
LVDS
18bit
18bit (H. V. Freq)
18bit (Synthetic)
LVDS
N/A
18bit
Chapter 2 Installation