Appendix B Installing PC/104 Modules
B.1 Installing PC/104 Modules
This SBC's PC/104 connectors give you the flexibility to attach PC/104
modules.
Installing these modules on the board is quick and simple. The following
steps show to mount the PC/104 modules:
1.
Remove the board from your system, paying particular attention to
the safety instructions already mentioned above.
2.
Make any jumper or link changes required to the CPU card now.
Once the PC/104 module is mounted, you may have difficulty in
accessing these.
3.
Normal PC/104 modules have male connectors and mount directly
onto the main card. (Refer to the diagram on the following page.)
4.
Mount the PC/104 module onto the CPU card by pressing the mod-
ule firmly but carefully onto the mounting connectors.
5.
Secure the PC/104 module onto the CPU card using the four
mounting spacers and screws.
PCA-6773 User's Manual
92