MTS Systems Temposonics R Series Operation Manual page 6

Temposonics R-Series SSI
®
Operation Manual
f Output (continued)
Signal options (box no. 18, 19)
0 Measuring direction forward, asynchronous mode
0
1 Measuring direction reverse, asynchronous mode
0
0 2 Measuring direction forward, synchronous mode 1
0 5 Measuring direction forward, asynchronous mode,
bit 25 = alarm, bit 26 = parity even
1 6 Measuring direction forward, asynchronous mode ,
internal linearization
9 9 Write "9" in box no. 18 and 19 for using further
combinations in boxes 20, 21, 22.
Measurement contents (optional: box no. 20)
Note: Choose "9" in box no. 18 and 19.
1 Position measurement
2 Differentiation measurement
3 Velocity measurement
4 Position measurement + temperature measurement
(only with data length = 24 bit)
5 Differentiation measurement
(only with data length = 24 bit)
6 Velocity measurement + temperature measurement
(only with data length = 24 bit)
Direction and sync. mode (optional: box no. 21)
Note: Choose "9" in box no. 18 and 19.
1 Measuring direction forward, asynchronous mode
2 Measuring direction forward, synchronous mode 1
3 Measuring direction forward, synchronous mode 2
4 Measuring direction forward, synchronous mode 3
5 Measuring direction reverse, asynchronous mode
6 Measuring direction reverse, synchronous mode 1
7 Measuring direction reverse, synchronous mode 2
8 Measuring direction reverse, synchronous mode 3
Internal linearization & diagnostics (optional: box no. 22)
Note: Choose "9" in box no. 18 and 19.
0 No further options
1 Internal linearization
2 Additional alarm bit + parity even bit
(not available for temperature output, only with data length =
24 bit)
4 Additional alarm bit + parity even bit and internal linearization
(not available for temperature output, only with data length =
24 bit)
4/ You need a second magnet for differentiation measurement
4
+ temperature measurement
4
6