Woodstock Shop Fox W1704 Owner's Manual page 35

Model W1704 (For Machines Mfd. Since 01/20)
The.D4058.3-Pc..HSS.Lathe.Chisel.Set.is ideal for bowl turning and
detail work. Each chisel measures roughly 16" long, with 10" ash han-
dles, and the high-speed steel blades measure a full
set includes one round, one curved, and one 90° corner chisel. Chisel
set is protected in a fitted wooden box.
The.D3781.4-Pc..HSS.Beading.Lathe.Chisel.Set.turns beaded spin-
dles with ease. Perfectly ground half-round profiles include
⁄ ", and ⁄ " diameters. Tapered sides allow closely-spaced, multiple
5 3
16 8
beads for complete design flexibility. Naturally finished ash handles
measure 8 ⁄ " and the high-speed steel blades measure 5
7
8
⁄ " beaded chisel blade measures 4" long).
1
8
The D4596.5-Pc..Woodworking.Caliper.Set includes compass,
straight dividers, inside calipers, outside calipers, and inside/outside
calipers. Perfect for woodturning and general layout work.
Find the center of round or square stock for lathe turning with the
D3098 Center Finder. One side locates a diagonal line on square
stock up to 8" x 8", and the other side locates a diagonal line on
round stock up to 4 ⁄ " in diameter. Marking two opposite diagonal
1
2
lines determines the center point. It's that simple!
The.D3640.Tool.Table.Plus.is designed to accommodate larger
benchtop machines. The table has a butcher block finish and mea-
sures 14" x 40" x 1 ⁄ " thick. The wide A-frame stand has a 700 lb.
1
4
capacity and measures 33" high. Bottom measures 47
Includes stand frame and top.
⁄ " thick! The
7
32
⁄ ", ⁄ ",
1 1
8 4
⁄ " long (the
1
8
⁄ " x 25 ⁄ ".
1 1
2 4
-33-