Mec 1330SE Service & Parts Manual page 39

Secton 10 - Control System
Park machine on a flat level surface. Using a spirit level or framer's level, check that the machine is
absolutely level, both fore-and-aft and side-to-side.
When the machine has been leveled, press Enter (arrow at lower right), press SAVE, then press the
right arrow at the top to reach the Calibrate Level Y screen.
Confirm that the Y-Axis is level side-to-side, then press Enter (arrow at lower right), then press SAVE.
This procedure is finished. Turn the Key Switch to the OFF position, then to either Platform or Base
positions to return to normal operation.
Page 35
Calibrate Level X
Set Enter, Save, Power off
Calibrate Level Y
Set Enter, Save, Power off
1330SE - Servce & Parts Manual
November 2019
ART_5095
ART_5096