Eld List Screen Fields Description - IBM 3745 Series Service Functions

BER Display Screens
ELD List Screen Fields Description
CA LIST TOTAL:01
SEL# DATE/TII·IE FLAG NAI·IE TYPE ID EVENT DESCRIPTIOI'J
770 12/02 06:53 CA5 10 B2 UNRESOLVED DATA /STATUS INTERRUPT
***
EHD OF FILE
***
-ENTER SEL# OR I'JAI·IE
==>
===>
Fl:END F2:J.1ENU2 F3:ALARt·1 F4:SUJ.lIIARY
Figure 2-16. ELD List Screen
xxxxx
LIST The criterion xxxxx of selection from the ELD summary, or from
the previous ELD list (xxxxx
=
CA in the above screen).
TOTAL
The number of BERs corresponding to the selection from the ELD
summary.
SEL# The sequence number of the BER in the BER file. BERs are num-
bered in ascending order from the oldest to the most recent.
(compare with DATE 1ST BER in ELD summary).
DATE
TIME
FLAG
NAME
TYPE
10
Enter this SEL# when you want the corresponding ELD detail
screen. The detail screen gives additional service information
c.oncerning a BER.
Note: . The BER file is not frozen while you work. New BERs may
be logged while you are troubleshooting, but they do not appear
on the screen. These new BERs (with a new BER number) will
appear the next time you request an ELD LIST display.
Four digits defining month and day.
Four digits defining hour and minute.
This field is not used.
More precise information about the origin of a BER (for example,
CS, line, or channel number). The NAME may be typed at the
cursor position to obtain the appropriate ELD list. The NAME is
repeated in the event description line of the ELD detail screen.
The number that categorizes the BER.
Two hex digits that give more precision as to the origin of the
BER.
EVENT DESCRIPTION: Up to 40 characters that describe the event.
2-14
3745 Communication Controller