IBM 3745 Series Service Functions page 275

SIT
Cancel Internal SIT (I-SIT)
Allows stopping an active trace. The buffer is released and no longer available (its contents are lost).
1. Select C in screen
m
of the "SIT Function Selection Procedure" on pag~ 12-3.
2. The trace stops and this message is displayed:
I-SIT CANCELED ON LINE xxx SCANNER xx
Freeze Internal SIT (I-SIT)
Allows stopping a trace temporarily. The buffer in use for that trace is not released, but the events
occurring during the 'freeze' time are lost.
1. Select F in screen
m
of the "SIT Function Selection Procedure" on page 12-3.
2. The trace stops, and this message is displayed:
I-SIT FROZEN FOR LINE xxx SCANNER xx
Resume Internal SIT (I-SIT)
Allows restarting a trace previously stopped by a freeze action.
1. Select R in screen
m
of the "SIT Function Selection Procedure" on page 12-3.
2. The trace restarts, and this message is displayed:
I-SIT RESUMED ON LINE xxx SCANNER xx
Display CSP Status
Allows displaying the status of the active and frozen I-SIT(s) or E-SIT(s) for a specific scanner.
1. In
0,
enter any line address of the scanner
you want to display the status of.
2. Enter D in
D.
3. Press SEND. The result can be either:
a. Screen
Ii
is displayed, or
b. If there is no SIT active or frozen, the fol-
lowing message is displayed:
REQUEST IGNORED ON LINE xxx SCANNER xx:
NO I-SIT ACTIVE OR FROZEN
12-6
3745 Communication Controller
D
• ENTER A DECI"IAL LINE ADDRESS
FRO~1
0 TO 1039 ••
>
D
- ENTER THE ACTION TO BE
PERFOR~1ED
(S. C. F. R. D. G) •• >
B
S: STIIRT INTERNAL TRACE
C: CANCEL INTERNAL TR"CE
F: FREEZE INTERrlAL TR"CE
R: RESUME INTERtlAL fR"CE
0: DISPLAY CSP STATUS
G: GET I-SIT BUfFER FROM SCANtiER
IIARNING: DURING I-SIT BUFFER TRANSFER EVENTS HAY BE LOST
Fl:END F2:MENU2 F3:ALARM F4:I-SIT BUFFER HAIIDLING
Figure 12-6. SIT Function Selection Screen