Copying Microcode Patches From A Diskette To The Moss Disk - IBM 3745 Series Service Functions

Copy Patch
1. The selected patches are copied in the
storage area reserved for the destination
diskette.
2. Press SEND again.
You obtain the next screen with patches to be
copied.
3. Repeat the operation in all screens that
contain patches to be copied. Use
Fa
(forward) and F7 (backward) to scroll through
the list.
4. After the last patch, press F6 (QUIT) to make
the copy effective.
When finished, this message is displayed:
SELECTED PATCH COPIED ON DISK(ETTE)
D
IOt~;:F ;E~
COpy ON MOSS DISKETTE
SELECTED TO BE COPIED
Pp,;CI"I5
::late'"
ceS:'~lp:l0'1
S
PA'C~6 ~atc~ deS:,..l p~ Ion 6
PATC~7 SELECTED TO SE COPHD
PI\TC~8
SELECTED TO
SE
COPlED
PATCHll •• )
patc~ deS~"lptl o~
11
PATC"13 •• ) catch descrl ptl on 13
(0 •
PI\IC~
WITH INCORRECT
C"tC~SUH)
- StLfCTlCN CO~lPlEaD. '~ESS SErIO
FI
:E~D
F3:AlARH F4:TOP f5 :80TTOll
III!t!IIJ
F 7
:3AC<.'i\R~
F8:<Cq" ..
~O
Figure 8-25. Patch Copy to MOSS Diskette Execution
Screen
Copying Microcode Patches from a Diskette to the MOSS Disk
This function permits collecting the patches developed on one 3745, and transferring and installing
them in another 3745.
F1 Use
F1 use is not allowed during a copy function.
1. You must be in the "Patch Management" func-
tion (see page 8-5).
2. Select option 5 in this screen.
3. Press SEND.
4. A message is displayed, asking you to mount
the source diskette from which patches are to
be copied.
5. Mount the diskette, and press SEND.
6. The 'patch copy from MOSS diskette'
selection screen
I!I
is displayed.
8-14
3745 Communication Controller
PATCH MANAGEMENT
SELECT ONE OPTION
(1 TO 5)
=.)
D
I • CREATE A PATCH
2 • APPLY. ERASE. MODIFY. OR SCAN NON-APPLIED PATCHES
3 = RESTORE. SCAN APPLIED PATCHES
4 • COPY PATCHES fq::'~ T~f DISK(PTn USED
FOq
Hll TO A DISKETTE
COPY PATCHES FROM A DISKETTE TO THE DISK
5 • (HTE) USED FOR IML
Fl ?END
F3?ALAR~1 F6?QUIT
Figure 8-26. Patch Function Selection Screen