IBM 3745 Series Service Functions page 21

MOSS Screen
Common Commands and F Keys Description
OFF (Log OFF) Disconnection from MOSS.
F1 (END)
F3 (ALARM)
F6 (QUIT)
F7 (FORWARD)
F8 (BACKWARD)
Note: You cannot use OFF while a function is active or pending; press F1 to
terminate it.
If a function is running, pressing F1 terminates that function. The previous
screen is displayed.
1. Erases the displayed alarm (if any) from the alarm area.
2. Displays the next alarm still in queue.
Note: Please note all information, especially the reference code, before
erasing the alarm. This information can still be found by displaying the BERs.
Return to the previous screen, in the same function. Not available in the first
screen of a function; in this case, use F1: END.
Allows going to the next screen
Allows going back to the previous screen
Note: Depending of the amount of information displayed or requested, or the
step of the procedure, any (or both) of the F7/F8 key(s) may be present (or not)
on the screen.
Keyboard Differences and Terminology
Because different types of console may be installed, the keyboards used may
vary, from country to country, and from customer to customer.
For standardization, we use specific terminology when referring to some keys of
the keyboard:
SEND The key pressed to confirm the data just typed in. Sometimes
known as the ENTER key.
BREAK
The key pressed to interrupt the automatic transmission, to commu-
nicate directly with the system (also known as ATTN or INTERRUPT
key). This key is also used to stop the refresh of the MSA.
Fn
Any function key (F1-F8) of the keyboard.
For operation information, refer to the console documentation.
1-8
3745 Communication Controller