TEC CB-426-T3 Owner's Manual page 98

A5.2 Overview (Cont.)
<3>TEST PRINT
<4>RAM CLEAR
Note:
Press the RESTART key.
This moves back to the previous
menu.
90
PRINT CONDITION ISSUE COUNT
PRINT SPEED 6"/S
SENSOR
TYPE[S] NO CUT
BACK
QUALITY
LABEL LEN
PAPER FEED
SLANT LINE(1)
SLANT LINE(2)
COLOR
CHARACTERS
BARCODE
AUTO PRINT(TRA.)
AUTO PRINT(REF.)
NO RAM CLEAR
MAINTE CNT CLEAR
PARAMETER CLEAR
PRINT STEP CLEAR ALL COLOR
HEAD1
HEAD2
NONE
The main menus can be navigated as follows:
<1>DIAG.
While pressing the FEED and PAUSE keys at the same time,
turn on the printer. Hold both keys until the "<1> DIAG." message
appears in the display.
This is the start of the Self-Diagnostic Test menu.
<2>PARAMETER SET
Press the FEED key. This is the start of the Parameter Setting menu.
<3>TEST PRINT
Press the FEED key. This is the start of the Test Print menu.
<4>RAM CLEAR
Press the FEED key. This is the start of the RAM Clear menu.
Appendix 5
1
TRANS
FEED YES
HIGH
102mm
V1.0
System Mode