TEC CB-426-T3 Owner's Manual page 56

3.4.3 Color Setup (Cont.)
48
3 Enter the ribbon color loaded in Head 1 (Back) in the same manner.
Since the black ribbon is loaded, select Black from the color list.
Do not mark the Color 2 checkbox when Head 1 is not used.
4 Click OK to complete the color setup.
If a desired color cannot be found in the color list, click the Color
1 or 2 down arrow, and select Custom to define the color similar
to the ribbon color loaded in the printer.
Click Define Custom Colors, and the Color screen appears.
Chapter 3 Printing