TEC CB-426-T3 Owner's Manual page 101

A5.4 Parameter
Setting (Cont.)
Print Start Position (-30.0mm to +10.0mm)
+0.0mm
One Label
Print Start Position
+3.0mm
One Label
Print Start Position
-3.0mm
One Label
Print Start Position
Media Feed Direction
Cut Position (-20.0mm to +20.0m)
+0.0mm
Cut Position
+3.0mm
Cut Position
-3.0mm
Cut Position
Media Feed Direction
Note:
See A5.7.3 for an example of the
cutting operation.
Back Feed Distance (-9.9mm to +9.9mm)
+0.0mm
Print Start Position
(Home Position after Feed)
-3.0mm
Print Start Position
(Home Position after Back Feed)
+3.0mm
Print Start Position
(Home Position after Back Feed)
Media Feed Direction
Print Stop Position (-30.0mm to +300.00mm)
+0.0mm
Print Stop Position
(When printing completes)
+3.0mm
Print Stop Position
(When printing completes)
-3.0mm
Print Stop Position
(When printing completes)
Media Feed Direction
Making Positional Adjustments
POSITION
When "<2> PARAMETER SET" appears, press the PAUSE key.
FEED ADJ.+10.0mm
Press the PAUSE key. Adjust the print start position.
After selecting the value, press the PAUSE key.
CUT ADJ. +11.0mm
Adjust the cut position.
After selecting the value, press the PAUSE key.
BACK ADJ. +1.5mm
Adjust the distance of back feed.
After selecting the value, press the PAUSE key.
STOP ADJ+288.0mm
Adjust the print stop position.
After selecting the value, press the PAUSE key.
Appendix 5 System Mode
93