Table of Contents
Advertisement
No.
LCD Messages
17
FLASH WRITE ERR.
18
FORMAT ERROR
19
FLASH CARD FULL
20
NO RIBBON
####*
21
HEAD ERROR
22
STACK OVERFLOW
23
STACKER ERROR
Display of error message
24
(See Notes.)
Notes:
If a command error is found in the command received, 16 bytes of the command error, starting from the
command code, will be displayed. (However, [LF] and [NUL] will not be displayed.)
Example 1
[ESC] T20 E60 [LF] [NUL]
The following message appears.
T20E60
Example 2
[ESC] XR; 0200, 0300, 0450, 1200,1 [LF] [NUL]
The following message appears.
XR;0200,0300,045
When the error command is shown, "? (3FH)" appears for codes other than codes 20H to 7FH and A0H to
DFH.
LED Indication
POWER ONLINE ERROR
*
Command error
Appendix A4
Printer Status
An error has occurred while writing
to flash memory
An erase error has occurred in
formatting the flash memory.
Data cannot be stored because the
flash memory is full.
The ribbon has run out.
There is a problem with the print
head.
The Stacker is full.
Printing was attempted with the
Stacker turned OFF.
A command error has occurred in
analyzing the command.
Command error
Message and LED
Acceptance of
Restoration
Status Request
by RESTART
Reset Command
key Yes/No
Yes/No
NO
YES
NO
YES
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
`
87
Advertisement
Table of Contents
