Menu Sequence - Instructions - IBM 6360 Product Support Manual

Menu Sequence - Instructions
The Instruction function serves two
purposes. It is used in the Create or
Revise Document Task when the operator
wants to designate a block of text
that must remain together. This text
will always be on the same page.
Cursor:
11
At Beginning Of
- - - - Section Of Text
- - - - To Be Kept
- - - - , - Together,
- - - X
I n Create Document Task
Or
Revise Document Task
~ ~~r~~
Of Section
: : : : : : : : Of Text To Be Kept
_ _ _ _ Together,
- - - X
Figure 2-18. Menu Sequence - Instructions
This function is also used to change
the page numbering of the system.
When the cursor is at the top of the
page and the Change Format (CHG FMT)
key is pressed, the FORMAT SELECTION
Menu displays. Selecting the HEADER
AND FOOTER Menu will permit the opera.
tor to enter an Instruction ~o change
the page numbering of the system.
Header Text
Cursor:
~
At Beginning
X
Of Page
Footer Text
Chapter 2. Operating Instructions 2-17