SECTION 14.
BAT FAILURES
Pre-CRT I nitialization BAT Failures
Check the following:
•
DC supply voltages.
•
AC input voltage.
•
Reseat
all
electronic cards and
check all
connectors
inside the
Electronics Module.
•
Reseat the Display Module connec-
tor 2.
Post-CRT Initialization BAT Failures
Check the following:
•
DC supply voltages.
•
•
•
•
•
•
•
•
AC input voltage.
Reseat
all
electronic
check all
connectors
Electronics Module.
cards and
inside the
Reseat the Display Module connec-
tor 2.
Reseat the keyboard logic card and
the diskette adapter card.
Check the keyboard logic card con-
nector and the keyboard cable con-
nector 7.
Check
all
connectors
Diskette Unit.
on
the
Check panel 1, connectors 5, 8.
Check panel 2, connector 10.
Chapter 10.
Intermittent Problem Diagnostic Approach
10-21