Loadable Diagnostics Display Format - IBM 6360 Product Support Manual

Loadable Diagnostics Display Format
The 25 lines of the diagnostic display
show the following line information
(Figure 9-11).
Line one has three fields. Each field
is separated by a vertical line.
•
•
•
Foreground Mode Field.
Displays
the function
being performed.
When in the service diagnostic
mode, this field will display the
diagnostics.
Function Name Field. Displays the
name of the operation being per-
formed in the foreground mode.
The contents will include one of
the following: MDI, Utilities,
System Exerciser or Program
Diskette.
Memory Size Field. Displays the
size of good memory and memory
card information. The first three
characters show the size of good
memory, and the last character (an
A, B, C, D, or E) shows the
card(s) configuration and position
of the distribution board where
the card(s) are installed.
A Type A ~ard in position E.
B Type B card in position E.
C 160A card in position E,
extender card in position F.
D 192A card in position E,
extender card in position F.
E 256B card in position E,
extender card in position F.
Note: The error code *900* OODO will
display if an operator trys to load a
program diskette into a system that
does not have enough memory to hold
the program. This error can be caused
by a memory failure.
9-18 IBM Displaywriter Product Support Manual