Table of Contents
Advertisement
IE-CS(T)-2TX-xRS232/485
Off-line COM Mapping
1. Add a target by inputting the IP address and selecting the Model Name without physically connecting the
IE-CS(T)-2TX-xRS232/485 to the network.
2. Modify the port settings as needed.
3. Right click in the IE-CS(T)-2TX-xRS232/485 list section and select Apply Change.
COM Grouping
The "COM Grouping" function is designed to simulate the multi-drop behavior of serial communication over an
Ethernet network. COM Grouping allows you to create a COM Group and redirect data from it to several physical
COM ports on IE-CS(T)-2TX-xRS232/485. With COM Grouping, you will be able to control multiple physical
serial ports simultaneously by operating only one COM port.
Creating a COM Group
Follow the steps below to add multiple COM ports into one group:
1. Select serial port(s) for the group that you are going to create, and right-click to select
6-18
IP Serial LIB
Advertisement
Table of Contents
