Table of Contents
Advertisement
IE-CS(T)-2TX-xRS232/485
2. In the Step 2/3, you must specify the operation mode you will be using. If your operation mode is not Real
COM, TCP Server, TCP Client, or UDP mode, click Cancel and to go back to main menu and choose
Operating Settings to select suitable settings.
3. In the Step 3/3, you can modify the serial settings.
4. Review your settings on the Finish Settings page. If you are sure they are correct, then click the
Save/Restart button to restart the device with these new settings.
Note: If your IP address changes, you will not be able to return to the Home Page with the Home
button.
5-4
Web Console Configuration
Advertisement
Table of Contents
