Monitor Relay Output; Change Password - Weidmuller IE-CS-2TX-1RS232/485 User Manual

IE-CS(T)-2TX-xRS232/485

Monitor Relay Output

Click Relay Output under Monitor to show the current status of the relay output. To cease the Relay Output
warning, click on the Acknowledge Event button.

Change Password

Input the "Old password" and "New password" to change the password. Leave the password boxes blank to
erase the password. If the password is erased, then IE-CS(T)-2TX-xRS232/485 will not have password
protection.
ATTENTION
If you forget the password, the ONLY way to configure IE-CS(T)-2TX-xRS232/485 is by using the "Reset to
default" button on IE-CS(T)-2TX-xRS232/485's top side to "Load Factory Default."
Remember to export the configuration file when you finish the configuration. By using the Import function
your configuration can be re-loaded into IE-CS(T)-2TX-xRS232/485 after using "Load Factory Default."
5-37
Web Console Configuration